Code: USA5644014ELK
Features
Breaking load of the strap: 22 kN
Trigger load in case of fall: 3 kN
Strap diameter: 40 cm
Velcro diameter: 12 cm
Linear strap length: 126 cm (without
energy absorber)
Strap length: 180 cm (with energy absorber)
Weight: ≈ 164 g
Straps
High tenacity polyester
The high tenacity filaments provide greater resistance than conventional fabrics.
Textile material resistant to surface flame (class F2/1.5mm) and edge flame (class K2/1.5mm) in accordance with standards:
• DIN 53438-3/1984 “Testing of combustible materials response to ignition by a small flame – Part 3 (Surface ignition)”
• DIN 53438-2/1984 “Testing of combustible materials response to ignition by a small flame – Part 2 (Edge ignition)”
Seams
In contrasting colors to the strap for better visualization and inspection, they are made with continuous stitching that provides great localized resistance, with straight continuous stitching for increased safety.
Technical Description
Anchoring strap for ladders with a sewn textile device for impact absorption and fall retention. It is secured on the upper steps through a twisted loop and closure with velcro straps for anchorage adjustment, allowing the force to be distributed in case the device is triggered. They are made of high tenacity polyester straps with a breaking load of 22 KN.
Recommended Use
Anchor point for lifeline on ladders.
Double triangular ring for lifeline attachment. Fast Connect Buckle allows quick attachment and adjustment; Fabric tongue facilitates passage through the buckle.
• Read the manual carefully;
• Training is essential;
• Properly adjust the product and always monitor during the execution of the work;
• Ensure that the tape and Velcro are properly positioned in place, thus locking the system;
• Once “triggered” in the event of a fall, even if it does not fully open, the Ladder Anchoring Strap must be discarded;
• Do not expose yourself to fall risks greater than Factor 2, as the device is not designed to withstand such a fall.
Concept
The ladder anchoring tape was designed with functionality and worker safety concepts in mind.
Quality
The development of this product was monitored and tested by professionals. It is produced on automatic machines that eliminate any possibility of human error.
Anchor Point Projection
Distance from the anchorage and mounting point: 33cm